Descripción
-
JEDEC standard 1.5V Power Supply
-
VDDQ = 1.5V
-
800MHz fCK for 1600Mb/sec/pin
-
8 independent internal bank
-
Programmable CAS Latency: 11, 10, 9, 8, 7, 6, 5
-
Programmable Additive Latency: 0, CL – 2, or CL – 1 clock
-
8-bit pre-fetch
-
Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
-
Bi-directional Differential Data Strobe
-
Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
-
On Die Termination using ODT pin
-
Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
-
Asynchronous Reset
-
PCB : Height 1.180” (30.00mm), double sided component
